OVERMARINE GROUP MANGUSTA 80 OPEN Spécifications | |
Nom: | BLUE TRINITY |
Type de bien: | Motor Yacht |
Année de construction: | 1998 |
Matériau de la coque: | Fiberglass |
Longueur: | 23.38m / feet |
Largeur: | 5.88 / 19.29 feet |
Tirant d'eau max: | 0.9 / 2.95 feet |
Cabines: | 3 |
Moteurs: | 2 x MTU MTU 16V2000 M90 1800hp |
Pavillon: | ITALY |
Region: | Italy, La Spezia |
OVERMARINE GROUP BLUE TRINITY Yacht à Vendre
Demandez des renseignements
WORKS
Works 2023:
- Engine service in April 2023
- Replacement of right engine turbines and intercooler
- Overhaul of the exhaust gas crossbar with replacement of the two right engine bends
- Replacement of Arneson high pressure hoses
- New teak cockpit
- New teak gangway
- New teak platform and steps
- Overhaul Onan 17.5Kw generator
- New Idromar watermaker 130 l/h with 19 hours
- UV water filter installation
- New boiler
- AIS installation
- New upholstery
- Replacement of internal and external LED lights bulbs
Works 2022:
- Sanding hull
- New seacocks
- Arneson service and new rubber bellows
Works 2020:
- New Kohler generator 20Kw
Works 2018:
- Total repainting of the hull and superstructure
Works 2015:
- Both engines landed
- Disassembly of supercharger air manifolds, exhaust manifolds, heads, injection pumps
and injectors, turbines. Cleaning of all disassembled parts
- Turbine overhaul with replacement of the 4 compressor impellers, bearings and an
exhaust scroll, overhaul of heads with surface grinding, replacement of both exhaust and
intake valve seats, valves and most of the valve guides, replacement of an exhaust gas curve
- Installed new valve bridges proceeding with the update of the 2000 HP type engines.
- Replacement of injection pumps and injectors
- Disassembly of connecting rods and pistons, liners, cleaning of the block, reassembly of
new liners, with new pistons equipped with floating ring, proceeding with the updating of
the 2000 HP type engines
- Replacement of all connecting rod bearings and connecting rods
- Disassembly of the lubrication oil pump, cleaning and reassembly with replacement of
bypass valves.
- Disassembly of diesel fuel rail, cleaning, replacement of pressure regulator valve.
- Removing and cleaning the intercooler
- Overhaul of starter motors, cleaning of exhaust manifolds and replacement of seals
- Dyno test to check engine power which turns out to be 1343Kw per engine